Range extenders

RE615X

AX1800 Wi-Fi Range Extender

  • 1 Gigabit Ethernet PortInterface
  • 100-240V~50/60HzInput Power
  • 15.2WMax. Power Consumption
01

Expand Your Ultimate
WiFi Experience

  • AX1800 WiFi 6 Range Extender
  • 1 Gigabit
    Ethernet Port
  • AX1800
    Fast WiFi
  • 1201 Mbps
    5 GHz 574 Mbps
    2.4 GHz
  • Works with any WiFi router
  • EasyMesh
    Compatible
  • One-Touch Connection
02

Life in the fast lane with advanced WiFi6

WiFi 6 comes with it all: faster speeds, lower latency, and more connections. It also features 25% faster data throughput compared with last-gen WiFi thanks to 1024-QAM. With this speed boost, experience high-speed and stable WiFi throughout your rooms.

RE615X
03

High-Performance Amplifiers
Cover Everywhere with Existing Router

Enjoy fluent streaming and gaming in whatever room you’re in thanks to RE615X’s amplifiers. Whether you’re sharing a pad with friends or living in your forever home, RE615X sends out strong signals to those hard-to-cover areas.

04

OFDMA

More efficient data.

Orthogonal Frequency Division Multiple Access helps integrate the data of different end devices for higher efficiency.

  • Beamforming

Strong, targeted WiFi.

Find the direction of your phone or laptop, and accelerate your signal strength.

05

Wide.
Wider.
Widest.

Keep your internet focused on a single room or blanket an entire floor with WiFi by picking between 3 strength levels on the Tether app.

RE615X
06

EasyMesh—Flexibly Create Whole Home Mesh WiFi

RE615X is EasyMesh-compatible. If you have any dead zones at home, just add another EasyMesh router/range extender to further form your whole home multi-gigabit mesh WiFi. No more searching for a stable connection.*

WiFi Dead Zone Killer

Eliminate weak signal areas with WiFi coverage for the whole house

Uninterrupted streaming when moving around your home

Gigabit Connectivity, 10× Faster

With one Gigabit LAN ports, speeds can be up to 10× faster
than standard Ethernet connections.§ Connect your
favorite wired devices to RE615X and get impressed!

  • Traditional Router
    with Extender Wi-Fi
07

Effortless One-Touch Setup

Press the WPS button on your router and extender to expand your WiFi coverage in seconds.

Step 1:

Press the WPS button on your router and the RE615X.

Step 2:

Relocate the RE615X to the best place with smart signal indicator.

Step 3:

Multicolor LED helps you find the right location for your range extender for the best WiFi extension.

Built-In Access Point Mode

RE615X is more than a wireless range extender. Simply plug an Ethernet cable into its Ethernet port, and easily turn your wired internet connection into a 2×2 MU-MIMO dual band wireless access point.

Control at Your Fingertips

Set up and manage your WiFi through the TP-Link Tether app from your phone (Android, iOS), including TP-Link routers and range extenders.

  • Good connection
  • Too far away from the host Router

Key features

Up to 1.8 Gbps Dual Band Wi-Fi

Separates 5 GHz (1201 Mbps) and 2.4 GHz (574 Mbps) WiFi bands for faster speeds and greater capacity with the WiFi 6 technology.†

Smart Roaming

Walk from room to room and stay connected with the fastest possible speeds.§

EasyMesh-Compatible

Flexibly creates a Mesh network by connecting to an EasyMesh-compatible router for seamless whole-home coverage.◇

Gigabit Ethernet Port

Provides faster wired connections to smart TVs, computers and gaming consoles.

AP Mode

Create a new WiFi access point through the Gigabit Ethernet port to enhance your wired network with WiFi capability.

Easy Setup

Plug in and then easily set up via a press of the WPS button or via the Tether App.

Ultimate Compatibility

Extends the range of any Wi-Fi router or wireless access point.*

Specifications

RE615X — Specifications
SpecificationValue
HARDWARE FEATURES
Interface1 Gigabit Ethernet Port
Button• WPS Button • Reset Button
Input Power100-240V~50/60Hz
Max. Power Consumption15.2W
Dimensions ( W x D x H )107×40×160 mm
Antenna2 External Antennas
WIRELESS FEATURES
Wireless Standards• IEEE 802.11a/n/ac/ax 5GHz • IEEE 802.11b/g/n/ax 2.4GHz
Frequency2.4 GHz and 5 GHz
Signal Rate• 574 Mbps on 2.4GHz • 1201 Mbps on 5GHz
Working ModesRange Extender / Access Point
Reception Sensitivity5GHz: 11a 6Mbps:-97dBm 11a 54Mbps:-78dBm 11ac HT20 MCS8:-74dBm 11ac HT40 MCS9:-69dBm 11ac HT80 MCS9:-65dBm 11ax HE20 MCS0: -97dBm 11ax HE20 MCS11: -66dBm 11ax HE40 MCS0: -94dBm 11ax HE40 MCS11: -63dBm 11ax HE80 MCS0: -91dBm 11ax HE80 MCS11: -60dBm 2.4GHz: 11g 6Mbps:-96dBm 11g 54Mbps:-78dBm 11n HT20 MCS7:-76dBm 11n HT40 MCS7:-72dBm 11ax HE20 MCS0: -95dBm 11ax HE20 MCS11: -65dBm 11ax HE40 MCS0: -93dBm 11ax HE40 MCS11: -62dBm
Wireless Functions• Enable/Disable Wireless Radio • DFS (the latest firmware and hardware version is required) • Access Control • LED Control • Power Schedule • Wi-Fi Coverage Adjustment
Wireless Security• WEP • WPA • WPA2 • WPA3
Transmission Power• 2.4 GHz ≤ 16 dBm • 5 GHz ≤ 21 dBm
Mesh TechnologyEasyMesh-Compatible◇
OTHERS
Package Content• Wi-Fi Range Extender RE615X • Quick Installation Guide
System RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
Environment• Operating Temperature: 0℃~40℃ (32℉ ~104℉) • Storage Temperature: -40℃~70℃ (-40℉ ~158℉) • Operating Humidity: 10%~90% non-condensing • Storage Humidity: 5%~90% non-condensing
Notes

†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

‡Use of Wi-Fi 6 (802.11ax), and features including OFDMA, 1024-QAM, MU-MIMO requires clients to also support the corresponding features.

§Smart Roaming is designed for devices that support the 802.11k/v standard.

◇TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections may be due to firmware conflicts of different vendors. The EasyMesh-compatible function is still being developed on some models and will be supported in subsequent software updates.

△The maximum capacity is the maximum number of signals that can be connected under ideal conditions, and the specific situation varies with the location of the RE, the type of connected equipment, etc.

*The product may not be compatible with routers or gateways with firmware that has been altered, based on open source programs, or is non-standard or outdated.

Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.

Interested in this product?

Request a quote: our team will confirm availability, compatibility and a deployment plan.

✉
WhatsAppCall usRequest a quote